ISIC-129 Air Curtain
An air Curtain is a modern device which, when
installed on a door, forms an invisible curtain of continuous air and thus
prevents escape of conditioned air and entry of outside hot, humid, dirty
and unwanted polluted air. The cabinets of Air Curtain are made of cold
rolled Mild Steels. The blowers are made of high quality aluminum sheets,
duly balanced both, statically as well as dynamically on computerised
digital balancing machines, designed to I provide uniform air with minimum
noise and no vibration. All units are throughly tested att works and meet
the highest standards. The motors used are off continuous rating with sealed
ball-bearings. HIGH VELOCITY MODELS (Approx 10 meters/second).
 |
| Size Door Width 600 m.m |
(2 feet) |
| Size Door Width 900 m.m. |
(3 feet) |
| Size Door Width 1200 m.m. |
(4 feet) |
| Size Door Width 1500 m.m. |
(5 feet) |
|
|
Optional Accessories
- Door operated limit Switch with door fitting
ISIC-130 Water Bath Rectangular (Single Walled)
Electrically operated, Water Bath is made of thick
Stainless Steel and has constant level of water. Complete with concentric
rings wire plug, etc. Provided with drainage facility. Concentric rings have
the 75 mm dia.
Available in following sizes :
- 300mmx250 mmx 100 mm (6 holes of 75 mm dia)
- 300mmx350 mmx 100 mm (9 holes of 75 mm dia)
- 350mmx400 mmx 100 mm (12 holes of 75 mm dia)
ISIC-131 Water Bath Rectangular (Double Walled)
Double Walled, inner made of 304 Stainless Steel,
Outer made of Mild Steel duly powder coated. Top made of Stainless Steel
with 75 mm thick holes with concentric rings. Insulation with thick glass
wool to prevent any heat loss. Temperature range from ambient to 99:C with
an accuracy of :t1°C. Thermostatically controlled fitted with Neon
Lamp, indicator main switch and workable on 220 V. 50 Hz single phaseAC.
Provided with drain and port for thermometer.
Inner Chamber made of Stainless Steel and available in following sizes
- 300 mm x 250 mm x 100 mm (6 holes of 75 mm dia)
- 300 mm x 350 mm x 100 mm (9 holes of 75 mm dia)
- 350 mm x 400 mm x 100 mm (12 holes of 75 mm dia)
Optional Accessories
- Stirrer with Motor and speed regulator
- Digital Temperature indicator cum controller
ISIC-132 Water Bath Cylindrical (Double Walled)
Double walled with inner made of Stainless Steel,
outer of heavy Mild Steel duly powder coated. Insulation with thick glass
wool. Provided with concentric rings, thermostat controlled. Temperature
upto 100°C with an accuracy of 1
oC.
Available in following sizes :
- 200mmx 150mm
- 250 mm x 250 mm
Optional Accessories
- Digital Temperature indicator cum controller
ISIC-133 Serological Water Bath
Temperature Range is from ambient to 100°C with
an accuracy of :t1°C. Double walled, Inner made of Stainless Steel,
outer made of heavy duty Mild Steel duly powder coated. Properly insulated.
Heating elements are tubular type, made of Copper duly Nickle plated.
Covered with perforated S.s.tray. Temperature is controlled with thermostat.
Temperature control knob is graduated in degree centigrades. Provided with
On/Off switch, indicator, cord plug, etc. Suitable to work on 220 V single
phase 50 HzAC.
Size (Dia & Depth)
|
| 300mm x 250mm x 175mm |
for 2 racks |
| 300mm x 300mm x 175mm |
for 4 racks |
| 455mm x 300mm x 175mm |
for 6 racks |
| 455mm x 455mm x 175mm |
for 8 racks |
|
|
Optional Accessories
- STIRRER with 1.20HP Motor and speed regulator
- Digital Temperature indicator cum controller
ISIC-134 High Precision Water Bath (With Stirring
Arrangement)
Double wailed chamber has inner made up of thick
S.S. and outer wall is of thick PCRC sheet duly Powder Coated. A glass
window is provided on the front side for an easy inside view. A high speed
stirrer with a motor of 1/20 H.P. is fitted to the unit for continuous
stirring and thus maintaining a uniform temperature throughout.Aspeed
regulator & digital indicator controller is provided on the front panel
to control speed of the stirrer and temperature of bath. The heating
mechanism comprises of set of heaters pertaining to faster and slower
heating Controls the temperature with a sensitivity of + 0.1 °C, from
ambientto 100 C. To work on 220/230 voltsA.C. supply. Chamber Size: 430 x
240 x 265 m.m. (Approx. 28Ltr. cap.)
Optional Accessories
- PID Digital Temp. Indicator-cum-Controller
ISIC-135 Water Bath Incubator Shaker (Metabolic
Shaking Incubator)
 |
|
|
It is a double walled unit with inside made of thick
S.S. sheet and outer made of M.S. Steel duly powder coated prevents falling
of condensed water droplets on the specimens. Heating is achieved through a
immersion type heater and the temperature is controlled by hydraulic type
thermostat with an accuracy of:t 0.5°C. The bath has an oscillating
tray riding on ball rollers oscillated through a geared variable speed
motor. Shaking speed range is between 40 to 140 cycles per minute. The
shaking tray can either hold test tubes or erlynmeyer flasks of 25 ml or 50
ml or 100 m or250 ml or 1000 ml. as ordered by the users. (Kindly mentioned
the capacity of the flasks while ordering). Supplied complete with one
shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work
on 220/230 volts A.C. supply. Available with heating arrangement only
(having temperature range from ambient to 100°C) or with both heating
and cooling arrangements (having temperature range from 5°C to 60°C).
Optional Accessories
- Spare shaking tray or test tube rack for part (a)or(b)
- Digital Temperature Indicator-cum-Controller
- Microprocessor PID Digital Temperature Indicator-cum-Controller
- Digital R.P.M. Meter
