Laboratory Equipment

Double walled, mounted on sturdy angle iron frame. Inner made ofthick G.I.! PCRC Sheet duly painted with high temperature aluminum paint, outer made of heavy duty PCRC duly primer coated and enamel painted. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Provided with double walled door with a system to prevent its opening. Door is provided with best quality handle, gasket etc. Provided with brackets to support the heavily laden trays at different heights. Temp. range is from ambient to 250°C with an accuracy of:t 3°C or as desired by you and is controlled by digital temperature indicator cum controller with PT-1 00 sensor. Heating is done with ISI mark heating elements made from ni-chrome heating wire placed in the sides 01 the chamber. V belt driven motor operated blower system in the side of the chamber to maintain the uniformity 01 the temp. throughout the chamber. Works on 220V 50HZ single phase A.C. Provided with exhaust shaft on the top ofthe body

These are double walled units with outer made of M.S. sheet duly powder painted and inner made of heavy gauge S. Sheet. Gap between the two walls is duly filled with high grade glass wool to avoid thermal loss. Temperature range from ambient to 150°C is controlled by Digital Temperature Controller with an accuracy of 1°C. It is capable of with standing a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 VoltsA.C. supply.

Inside Size (Diaxdepth)

• Round : 200 x 250 m.m. (8"x10")
• Round : 250 x 300 m.m. (10"x12")
• Round : 300 x 300 m.m. (12"x12")

Optional Accessories

• Microprocessor PID Control

These are sturdy double walled units with outer chamber made of M.S. sheet duly powder coated / Painted inner made up of anodised aluminium or S.S sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated selves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperatture. Temperature is controlled by hydraulic type capillary thermostat from ambient to 90°C :t 0.5°C. An Lshaped prismatic thermometer is fitted to unit for reading the chamber temperature. Air ventilators are also provided on the sides of unit. To work on 220/230 voltsA.C. Supply.

Size inside chamber : (W x D x H)

• 300 mm x 300 mm x 300 mm
• 355 mm x 355 mm x 355 mm
• 455 mm x 455 mm x 455 mm
• 455 mm x 455 mm x 605 mm
• 605 mm x 605 mm x 605 mm
• 605 mm x 455 mm x 910 mm
• 605 mm x 605 mm x 910 mm

Optional Accessories

• Air circulating fan
• Microprocessor PID Control
• Digital timer

Double walled, inner made of thick stainless steel, outer made of heavy duty M. Steel duly powder coated. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Door is provided with best quality handle, gasket etc. Inner chamber is provided with 2/3 nos. perforated stainless steel. Temp. range is from ambient to 250°C in oven and from ambient to 70°C in incubator and is controlled by digital temperature indicator cum controller with PT-1 00 sensor with an accuracy of +/-1 °c. Heating is done with ISI mark heating elements made from ni-chrome heating wire placed in porcelein cups in bottom as well as in sides to maintain the uniformity of the temp. Air circulating fan to maintain the uniformity of the temp. throughout the chamber. Separate control for each chamber and the control panel provided on the top.

Size inside chamber (Width x Depth x Height)

• 355 mm x 355 mm x 355 mm
• 455 mm x 455 mm x 455 mm
• 455mm x 455mm x 605mm
• 605 mm x 605 mm x 605 mm

Optional Accessories

• Microprocessor PID Control
• Digital timer

Double walled Inside chamber made of Stainless Steel, outer made of M.S. Sheet duly powder coated. Temperature Range 5°C above ambient to 90°C controlled by PID digital temperature controller with an accuracy of:!: 0.5°C. Provided with a carrier to hold 6 nos. of bottles with size 60mm dia x 200mm depth and it rotates at speed of 2 to 16 rpm. Provided with Air circulation fan to ensures temperature uniformity Rotor can. Provided with glass window in the doorto inspectthe chamber. Works on 20/230 VoltsAC.

Useful for hardening, annealing, reheating etc., Outer made of double walled thick PCRC Sheet duly powder coated painted insulation with high temperature ceramic fiber wool. Heating elements made of Kanthal wire in coil form wrapped on the muffle, embedded in high grade refractory cement and backed by HIGH DENSITY CERAMIC FIBRE BLANKET, which avoids loss of heat. The temperature is controlled by digital temperature indicator cum controller. For the models of Maximum temperature of 1000°C, the working temperature is 900'C and for higher temperature models, the maximum temperature is 1200'C and the working temperature is 1100°C

Muffle Size (WxHxD)

• 100x100x225mm
• 125x125x250mm
• 150x150x300mm
• 200x200x300 mm
• 175x175x475mm

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stoved powder coated paint. Insulation between inner and outer wall is done with 75mm thick glasswool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°C and is controlled by Electronically controlled by Digital temperature Indicator cum Controller with PT-1 00 sensor.

This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of:!: 0.5°C~ Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. _Heating is done with ISI mark strip type heaters placed near the cooling coils.Air is circulated by 2-nos. ISI mark Silicon binded motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

The following optional arrangements can be made in each model of BOD Incubator.

1. BOD Incubator with interior illumination with 3 number fluorescent tube of 60 mm length placed vertically along the back wall. Minimum temperature can be obtained from 10°C to 50°C when all the tubes are on at the extra.
2. BOD incubator incorporated with timer 0-24 hours for regulating cyclic illumination condition at extra cost.
3. Micropocessor based Programmable Timer
4. Humidity control from ambient to 90% by Humidistat at extra cost
5. Digital humidity indicator cum controller
6. Shaking machine can be fitted inside the BOD with variable speed by regulator
7. Voltage Stabilizer 2 KVA at extra cost
8. Micro Processor based P.I.D. controller can be provided instead of Electronic Digital Temperature indicator-cum-controller
9. Micro Processor programmable controller for nine control & nine step
10. Automatic Voltage Stabilizer 3.0 KVA. (TRIPLE RELAY).