Home »
Our Products » Laboratory Equipment
Laboratory Equipment
Our wide assortment of superior quality laboratory
equipments mitigates the time consumed in carrying out laboratory activities
owing to their high efficiency and easy operation features. They perform
accurately in accordance with the requirement that result in giving optimum
output needed in the laboratory.
ISIC-115 Bacteriological Orbital Shaking Incubator
Body made of thick Stainless sheet 304 quality. Top
lid is made of transparent see through plexi glass. Variable speed rotary
shaker platform is fitted with imported DC driven motor for continuous
operation. Unit is also fitted with digital RPMISpeed indicator. Shaking
platform can accommodate 16 flask of 250 1500ml or 25 flask or 100ml or 36
flask of 50ml provided at the base of incubator so as to shake Erlenmeyer
flasks. Variable speed motor is fitted outside of the inner chamber at the
base. Complete unit is mounted on a sturdy angle iron frame. Temperature
range from ambient to 70°C is controlled by Digital Temperature
Indicator cum controller with an accuracy of 0.5°C. Provided fitted
with air circulation fan for temperature uniformity. Work in 220 I 230 v. AC
supply
ISIC-116 Humidity & Temperature Control Cabinet
 |
|
|
Double walled, inner made of Stainless Steel, outer
made of thick best quality Mild Steel, the surface of which is powder
coated. Insulation between inner and outer wall is done with 75mm thick
glass wool to prevent any heat loss. Inner chamber is provided with 3 nos.
perforated Stainless Steel shelves with ribs to adjust the shelves at
desirable height. Provided with double door, inner made of thick transparent
full view glass and outer door is double walled metallic properly insulated
with glass wool and also provided with best quality handle, gasket etc.
Whole unit is mounted on castor wheels. Temperature range is from ambient to
60°C and is controlled by Digital temperature Indicator Cum Controller
with PT-100 sensor. This controller is provided with time delay relay to
control the accuracy in maintaining the temperature. Temp. is maintained
with an accuracy of +/1 °C.
Heating is done with ISI mark strip type heaters placed around the inner
chamber. Air is circulated by 1 no. .ISI mark Silicon winded motors which
are connected to balanced blowers. Humidity will be maintained up to 95%
with an accuracy of +1- 3% and humidity is generated by imported mist
Generator and is controlled with the help of Imported Humidistat and is
indicated by Round Hygrometer. Humidity is generated through a water
reservoir placed in the lowerlside portion of the chamber. Provided with
On/Off switch, Indicators, Digital Controllers etc.
Size (W x D x H) inside chamber
- 455mm x 455mm x 710mm
- 605 mm x 605 mm x 605 mm
- 605 mm x 605 mm x 91 0 mm
same as Above chamber with temperature range 1 O'C to 60'C:!: 2"C
Le. with cooling & heating system & Humidity 55% to 95%:!: 5%
Size (W x D x H) inside chamber
- 455mm x 455mm x 710mm
- 605 mm x 605 mm x 605 mm
- 605mm x 605mm x 910mm
Optional Accessories
- Humidity chamber can be supplied with Electronic Digital Indicator
cum Humidity controller at an extra cost
- PID Controller at extra cost
- Micro Processor programmable controller for nine control & nine
step
ISIC-117 Seed Germinator (Single Chamber)
Most suitable for conducting various experiments on
a variety of seeds under different conditions of temperature and humidity.
Atomospheric conditions are created within the chamber to perform different
experiments without gone onto the field. The double walled unit has inner
chamber made up of S.S. and outer chamber of M.S. Sheet duly powder coated.
Temperature from 5°c to 50°c:!: 1°c is controlled by DIGITAL
TEMP. indicator-cum-controller. Humidity (NOT ADJUSTABLE) is created in a
S.S. water reservoir fitted at the bottom to provide 90% to 95%:!: 3% RH
Humidity. Supplied complete with 14 adjustable perforated trays. Complete
with cord and plug to work on 220/230 V. A.C. Supply.
ISIC-118 Seed Germinator (Dual Chamber)
 |
|
|
Double Walled, inner made of thick Stainless Steel,
outer made of thick best quality mild steel duly powder coated painted,
properly insulated with 75mm glass wool to prevent any heat loss. Provided
with full view glass door for inspection of material in the both chambers.
Provided with dual chamber of inner size 555 x 605 x 910 mm (WxDxH) each.
Each chamber is provided with 6/14 perforated Stainless steel trays.(With
Standard configuration only 6 trays are provided in each chamber). Each
chamber is provided with Inner full view transparent glass door and outer
double walled, metallic door with best quality handle, leak proof magnetic
gasket, lock etc. Whole unit is mounted on castor wheels for easy mobility.
Both the inner chambers are provided with water resorvior (Tank) made of S.
Steel and provided with constant level of water, drainage made of brass is
provided. Temp. range is from 5°C to 50°C in one chamber and
ambient and above in other chamber i.e. one chamber is provided with heating
and cooling system, and other chamber is provided with only heating system.
Cooling is done with the help of ISI mark compressor relay, capacitor etc.
Provided with fan cooled condensor. Provided with separate digital
indicator cum controller with PT 100 Sensor in both the chamber. This temp.
controller is provided with unique facility of time delay relay which
automatically controls the accuracy of temp. The resolution of digital
controller is 0.1 DC. Humidity is from ambient to 90% RH (Adjustable) and is
controlled by Humidistat with an accuracy of +/- 3% and Humidity is
generated through a S.Steel reservoir placed in the bottom of th~ main
chamber and is generated through Imported Mist Generator .Provided with
motorized powerful two number fans in each chamber for uniform air
circulation. Each chamber is fitted with separate controls for heating
cooling temp. setting humidity setting, different display of parameters and
is provided in the front of the each chamber. Works on 220 V 50 Hz, Single
PhaseAC.
same as above but provided heating and cooling system in the both
chambers
Optional Accessories
- Spare tray at extra cost
- Humidity chamber can be supplied with Electronic Digital Indicator
cum-Humidity controller at an extra cost
- Microprocessor PID Controller at extra cost
- Seed Germinator can be provided 0-24 hour's timer for regulating
cyclic illumination condition at the extra cost.
- Micropocessor based Programmable Timer
- Automatic Voltage Stabilizer 4.0 KVA. (TRIPLE RELAY).
ISIC-119 Plant Growth Chamber
 |
|
|
Double walled, inner made of Stainless Steel 304
quality, outer made of thick best quality Mild Steel the surface of which is
primer coated for anti rusting and is duly enamel/ powder coated paint.
Insulation between inner and outer I wall is done with 75mm thick glass wool
to prevent any heat loss. Inner chamber is provided with 3 nos. perforated
stainless steel shelves with ribs to adjust the shelves at desirable height.
Provided with double door, inner made of thick transparent full view glass
and outer door is double walled metallic properly insulated with glass wool
and also provided with best quality handle, gasket, lock etc. Provided with
door operated illumination lamp. Whole unit is mounted on castor wheels.
Temp. Range is from 5°C to 60°C and temp. can be obtained from
15DC to 50DC f1 DC when all lights from two sides and top are 'ON'.
Temperature is controlled by DUAL electronic digital temp.
controller-cum-indicator to set two temp. for day and night with PT-1 00
sensor. This controller is provided with time delay relay to control the
accuracy in maintaining the temp.. Temp. is maintained with an accuracy of
+/- 0.5°C Cooling is done with ISI Mark compressor of KIRLOSKAR make
which is connected to thick copper coils placed in the rear of the chamber
through condenser, fan motor, capacitor, relay etc. Whole cooling unit is
placed below the main chamber in a GI housing. CFC Free, Environment
friendly. Heating is done with ISI mark strip type heaters placed near the
cooling coils. Air is circulated by 2-nos. ISI mark Silicon binded motors,
which are connected to balanced blowers, which operates alternatively and
continuously with heating and cooling. Provided with On/Off switch,
Indicators, Digital Controllers etc. Exterior Illumination is done with the
help of fluorescent tubes 60 cm. Long of 20wt. each placed vertically in the
side wall. Provided with automatic 0-24 hours Timer with battery backup.
Humidity maintained from ambient to 90% with the help of natural Mist
Evaporator and is controlled by humidity controlled by Digital Humidity
Controller with an accuracy of 3% RH
 |
| Width x Height x Depth |
Size |
| 570 mm x 875 mm x 550 mm |
10 cu. ft. |
| 775 mm x 900 mm x 775 mm |
20 cu. ft. |
| 825 mm x 1200 mm x 825 mm |
30 cu. ft. |
| 900 mm x 1820 mm x 800 mm |
45 cu. ft. |
|
 |
Optional Accessories
- Micropocessor based PID Temp. Cntroller
- Micropocessor based Programmable Timer
- Micropocessor based Humidity Controller
ISIC-120 Deep Freezer
Double walled with inner chamber made of S.S./
Plastic and outer of thick PCRC sheet duly enamel painted. Temperature range
from ambient to -20°C is achieved by hermetically sealed compressor.
The gap between the inner and outer wall is filled with high grade PUF
Insulation to avoid thermal loss. Body is mounted on a sturdy angle
ironframe and is mounted on castor wheels. Unit is fitted with Micro
Processor Digital Temperature Indicator-cum controller. Horizontal Chest
type models are supplied in a single compartment whereas vertical models are
supplied with three storing shelves.
Optional Accessories
- Automatic Voltage Stabilizer4 KVA. (TRIPLE RELAY)
ISIC-121 De-Humidifier
(fitted With Time Controlled Safety Device, In Case Humidity Controller
Fails,
For Safety Of The Compressor)
 |
|
|
Dehumidifiers are water condensing type. base on "Refrigeration
Cycle" to avoid use of expensive chemicals required for dessicant type
models. The unit is self standing and is mounted on a study angle iron
frame, fitted with caster wheels. Dehumidifier excess moisture from the
atmosphere and it fitted with hermetically sealed compressor. Heat exchanger
and water condensing coils aremade of S.Steel collection tank is provided
below the unit to collect condensate water, Humidity is controlled by
automatic HUMIDISTAT incorporated in the unit upto 30% :!: 3% RH, depending
upon the ambient conditions. To achieve very low humidity, the room should
have a independent window type Air Conditioner to match with the
dehumidifier heat load in the room. Suitable to work on 220/230 VoltsA.C.
Supply.
Capacity : 1.5 Tonne
Optional Accessories
- Digital Humnidty controller cum indicator
- Automatic Voltage Stabilizer4.0 KVA. (TRIPLE RELAY).