Laboratory Equipment

Our wide assortment of superior quality laboratory equipments mitigates the time consumed in carrying out laboratory activities owing to their high efficiency and easy operation features. They perform accurately in accordance with the requirement that result in giving optimum output needed in the laboratory.

An air Curtain is a modern device which, when installed on a door, forms an invisible curtain of continuous air and thus prevents escape of conditioned air and entry of outside hot, humid, dirty and unwanted polluted air. The cabinets of Air Curtain are made of cold rolled Mild Steels. The blowers are made of high quality aluminum sheets, duly balanced both, statically as well as dynamically on computerised digital balancing machines, designed to I provide uniform air with minimum noise and no vibration. All units are throughly tested att works and meet the highest standards. The motors used are off continuous rating with sealed ball-bearings. HIGH VELOCITY MODELS (Approx 10 meters/second).

Optional Accessories

• Door operated limit Switch with door fitting

Electrically operated, Water Bath is made of thick Stainless Steel and has constant level of water. Complete with concentric rings wire plug, etc. Provided with drainage facility. Concentric rings have the 75 mm dia.

Available in following sizes :

• 300mmx250 mmx 100 mm (6 holes of 75 mm dia)
• 300mmx350 mmx 100 mm (9 holes of 75 mm dia)
• 350mmx400 mmx 100 mm (12 holes of 75 mm dia)

Double Walled, inner made of 304 Stainless Steel, Outer made of Mild Steel duly powder coated. Top made of Stainless Steel with 75 mm thick holes with concentric rings. Insulation with thick glass wool to prevent any heat loss. Temperature range from ambient to 99:C with an accuracy of :t1°C. Thermostatically controlled fitted with Neon Lamp, indicator main switch and workable on 220 V. 50 Hz single phaseAC. Provided with drain and port for thermometer.

Inner Chamber made of Stainless Steel and available in following sizes

• 300 mm x 250 mm x 100 mm (6 holes of 75 mm dia)
• 300 mm x 350 mm x 100 mm (9 holes of 75 mm dia)
• 350 mm x 400 mm x 100 mm (12 holes of 75 mm dia)

Optional Accessories

• Stirrer with Motor and speed regulator
• Digital Temperature indicator cum controller

Double walled with inner made of Stainless Steel, outer of heavy Mild Steel duly powder coated. Insulation with thick glass wool. Provided with concentric rings, thermostat controlled. Temperature upto 100°C with an accuracy of 1^oC.

Available in following sizes :

• 200mmx 150mm
• 250 mm x 250 mm

Optional Accessories

• Digital Temperature indicator cum controller

Temperature Range is from ambient to 100°C with an accuracy of :t1°C. Double walled, Inner made of Stainless Steel, outer made of heavy duty Mild Steel duly powder coated. Properly insulated. Heating elements are tubular type, made of Copper duly Nickle plated. Covered with perforated S.s.tray. Temperature is controlled with thermostat. Temperature control knob is graduated in degree centigrades. Provided with On/Off switch, indicator, cord plug, etc. Suitable to work on 220 V single phase 50 HzAC.

Size (Dia & Depth)

Optional Accessories

• STIRRER with 1.20HP Motor and speed regulator
• Digital Temperature indicator cum controller

Double wailed chamber has inner made up of thick S.S. and outer wall is of thick PCRC sheet duly Powder Coated. A glass window is provided on the front side for an easy inside view. A high speed stirrer with a motor of 1/20 H.P. is fitted to the unit for continuous stirring and thus maintaining a uniform temperature throughout.Aspeed regulator & digital indicator controller is provided on the front panel to control speed of the stirrer and temperature of bath. The heating mechanism comprises of set of heaters pertaining to faster and slower heating Controls the temperature with a sensitivity of + 0.1 °C, from ambientto 100 C. To work on 220/230 voltsA.C. supply. Chamber Size: 430 x 240 x 265 m.m. (Approx. 28Ltr. cap.)

Optional Accessories

• PID Digital Temp. Indicator-cum-Controller

It is a double walled unit with inside made of thick S.S. sheet and outer made of M.S. Steel duly powder coated prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by hydraulic type thermostat with an accuracy of:t 0.5°C. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or erlynmeyer flasks of 25 ml or 50 ml or 100 m or250 ml or 1000 ml. as ordered by the users. (Kindly mentioned the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 100°C) or with both heating and cooling arrangements (having temperature range from 5°C to 60°C).

Optional Accessories

• Spare shaking tray or test tube rack for part (a)or(b)
• Digital Temperature Indicator-cum-Controller
• Microprocessor PID Digital Temperature Indicator-cum-Controller
• Digital R.P.M. Meter