Laboratory Equipment

Our wide assortment of superior quality laboratory equipments mitigates the time consumed in carrying out laboratory activities owing to their high efficiency and easy operation features. They perform accurately in accordance with the requirement that result in giving optimum output needed in the laboratory.

The unit is recommended for making pyrogen free distilled water of a very high degree of purity. Made out of S.S. special kettle element is fitted with Ejection Device/Auto Cut for safety of the element is provided water supply is stopped. The cock fitted to the unit is of brass C.P. A wall Mounting clamp is provided with the unit. Supplied with cord and plug to work on 220/230 voltsA.C.

Double walled construction with inner and outer chamber made of S.S. the gap in between being filled with glass wool. The condenser and top are also made of S.S. the raw water is first made of pass around the tubes in the condenser Where it gets heated nearly to the boiling point thus economising the heating energy. The heated water passes to the evaporator through a water level maintaining pipe. Excess water is let out through the drain. To work on 220/230 voltsA.C. supply.

Double Bed Deionizer : Treated water confirms to 151 1069/64
Unique feature condicitivity meter with linear scale operates on AC/DC of 9 volts battery cell.Non Corrosive Regeneration Tank.High capacity cation &Anion exchange resign upflow treatment. Portable metallic stand with wheels. Can directly be connected to tap water.

Four Bed Deionizer : It consists of4 beds i.e. pre-filter, Activated Carbon Cation, Anion Column.

Consists of : Inbuilt prefil, Cation and Anion Resin Columns, Conducivity meter operators on AC/DC (9V Battery Cell). Deioonised water will have conductivity of less than 1 Oms/cm and PH of7.5 to 8.5

Mixed Bed De-Mineralizer : Confirm to.IS11 00/60 :
This mixed bed deminralizer is used as polishing unit with double orfour bed demineralizer.

Mainly use for mixing of chemicals, solvents / solutions and are most suitable for shaking in Erlenmeyer flasks. Body is mounted on heavy duty M.S. angle iron frame duly painted. The platform is made ofthick mild steel sheet duly painted fitted with rubber discs to hold Erlenmeyer Flasks of different capacity. Platform is mounted on ball bearing crank shafts with a orbital dia. of approx. 1.5" to 2". Heavy duty motor coupled by means of V - Belt with pitch pulley system is housed inside the frame. Speed can be controlled through a mechanical speed control system. 150 to 200 rpm. Work on 220/230 volts A.C.supply

Optional Accessories

• DC Motor Drive with Continuosly Variable Electronic Speed Regulator in lieuof mechanical speed control & A. C. Motor (RPM range from 50 to 250 rpm)
• Digital RPM/ speed meter.
• Mechanical Timer
• Digital Timer
• Spare S. S. Clamps

Used forV.D.R.L. Tests, blood grouping tests, various agglutination tests orfor mixing of solutions in small bottles, flasks or beakers. It has a platform of size 300 x 300 mm. and can accommodate blood Bottles slides or flasks using a spring holder. Supplied complete with cord and plug to work on 220/230 voltsA.C.

Optional Accessories

• Automatic 0-60 minutes "GERMAN" Timer
• Microprocessor Based Digital RPM Meter

Kahn racks, bottles or flasks of different sizes can be shaken by adjusting the compartments provided on the shaking rack. DC Motor Drive with contnuous!y variable electronic speed regulator, The rate of motion can be adjusted by electronic speed regulator from 140 to 250 r.p.m approximately. To work on 220/230 volts. A.C. supply.

Platform Size Body

• 20" x 13" x 4"
• 31" x 17" x 4"
• 36" x 18" x 4"

Optional Accessories

• Microprocessor based digital RPM counter
• Automatic 0-60 minutes "GERMAN" Timer
• Automatic Digital Timer

It has a heavy cast iron with rugged construction and two side arms for holding flasks. Fitted with a F.H.P heavy duty motor with variable speed. Can hold flasks from 100 to 1000 ml. Capacity. Supplied with cord and plug to work on 220/230 volts AC. supply.

• To hold 4 flasks.
• To hold 4 flasks and top platform to hold 4 flasks/bottlex.
• To hold 8 flasks.
• To hold 8 flasks and top platform to hold 4 flasks/bottles.

Optional Accessories

• Automatic 0-60 minute "GERMAN" Timer
• Microprocessor based digital RPM Meter