• Low cost of oxygen production
• No other raw material needed accept Air.
• Pressure Swing Absorption Principle.
• Adjustable dual flow meter.
• Secure and reliable operation
• Low noise operation.

• Rapid Pressure Swing Absorption (RPSA) Process- NASA derived technology.
• ABS injection molded cabinet which performs PVC and Noryl in strength and durability.
• Flow Control Knob allows you the ability to protect your patient from the harmful effects of exceeding prescribed oxygen level.
• 4.35~ 10.15 PSI oxygen output pressure allows the patient the freedom to use longer tubing without restricted the flow.
• Quiet Unit-allowing restful sleep to patients. No consumables required except air.
• Low cost of oxygen production
• Built in atomizer device for atomizing therapy (Nebulization Therapy).
• Built in High Pressure and Low Pressure Alarm Uninterrupted flow of Oxygen.

.

• Two Gases Rotameter Oxygen & Nitrous-Oxide
• Oxygen Flowmeter range 100 cc/min. to 10 liters/min., Nitrous Oxide Flowmeter Range 200cc /min. to 12 liters/min.
• Standard Fresh Gas Outlet.
• Change Over System Open Circuit to Close Circuit.
• Emergency Flush Valve at front Panel connected to incoming O2 supply
• Goldman type Halothane Vaporizer.
• Parking space for two additional Vaporizers.
• Non-return cum Pressure Relief Valve minimize risk Of back flow of gases.
• Blows off valve when pressure exceeds 200cm of Water column fitted.
• Provision to fit Ventilator.
• Provision to fit Carbon Dioxide Absorber.
• Extended platform at rear for two 'B' type cylinders.
• Table top made of Stainless Steel.
• Top Tray provided at eye level for keeping Monitoring Equipments.
• Maggill's or Bains circuit.
• One spacious Drawer on smooth runner.
• Four Castor Trolley with front two lockable Wheels.
• Pin Index Yokes two for Oxygen and two for Nitrous Oxide.
• High-efficiency Regulators for reliability two each for O2 & N2O.

• N2O cut off in case failure of Oxygen supply.
• Low Pressure Oxygen Audible Alarm.

• Easy access of Infant from all sides with thick acrylic collapsible side panels
• Acrylic baby tray with Infant's Head up / down facility & foam mattress.
• Provision for positioning X - ray cassette.
• S.S. Tray with slot to use under surface phototherapy.
• Swivelling warming source for taking X - ray
• Consist of CERAMIC INFRA RED / SILICON QUARTZ GLASS HEATER
• S.S. reflector with safety grill designed such to achieve uniform temperature & easy cleaning without any electrical shock hazzard.
• Instrument tray, pole for Infusion pump & I.V. Stand.
• Examination lamp with sufficient illumination to access accurate infant colour during procedures.
• M.S. Fabrication with powder coated paint.
• Mounted on castors for easy mobility.

Servo Control is an electronic feedback system which functions as a thermostat to maintain a constant temperature at the site of Skin Probe by regulating the heat output of Radiant Warmer. Maintaining a constant abdominal Skin temperature between 36.5 & 37.0°C is the simplest way to provide a " thermoneutral" environment, minimizing the no. of calories needed to maintain normal body temperature & reducing the risks of cold stress or overheating. Servo control is the only acceptable method of heat regulation for the Infant cared for under a Radiant Warmer.

Air Control is an electronic feedback system which functions as a thermostat to maintain a constant temperature of baby cradle by regulating the heat output of Radiant Warmer. It also acts as a WATCH DOG as Air over temperature cuts off heater even if the Warmer is operating is Servo Mode.

The Manual mode allows the Warmer to be kept 'baby ready' without nuisance alarms. When needed the Warmer provides safe powerful & controlled warming to restore the temperature drop experienced by the baby immediately after delivery.

• Oxygen pressure adjustment regulator with hose pipe
• Humidifier bottle
• Reusable Silicon Patient tubing
• Oxygen flow meter with flow control facility (0-15 Lt / Min)
• Silicon Autoclavable Resuscitation Bag (250 ml) with Neonatal & Infant mask.

Electrical operated Suction unit with presuure adjustment facility (0-110 mm Hg) with unbreakable & autoclavable jar.

Monitors Oxygen pressure delivered through Resuscitation Bag.

Laryngoscope with 0 & 1 straight blades, disposable E. T. Tubes with slip joints.

• Infant Warmer (With Dual Probe)
• Infant Warmer (Skin / Manual)
• Infant Warmer (Air / Manual)

Standard 12-lead measure, 3-lead print, 1-lead display on the screen. Input resistance: ?2.5M? Record resolution: Y axis ?8 points/mm, X axis?16 points/mm(speed of paper 25mm/s) Z ?8 points/mm( speed of paper 50mm/s) Record paper: 48mm*15m Recording sensitivity standard sensitivity 10mm/mV, allowance inaccuracies ±5% Sensitivity shift amplifier has1/4 (2.5mm/Mv), 1/2 (5mm/mV), 1(10mm/mV), 2(20mm/mV) sensitive shift when printing. The allowance inaccuracies range from 1 shift to other shift is±5% Time constant: ?3.2s Temperature drift: between 5°C~40°C and the baseline drift average is not more than 0.5mm/°C Disturbance between channels: under standard sensitivity, each channel's interdisturbance should be more than 0.5mm Auto lead mode and manual lead mode Lead-off Detection with display indicator LCD display with English interface, signs and numbers. Common Mode Rejection Ratio: ?60dB Device storage and transportation condition Environment temperature range -20°C+55°C Relative humidity range ?93% Atmosphere pressure range 500 hPa~1060hPa Equipment operation environment condition Environment temperature range +10°C+40°C Relative humidity range 30%~75% Atmosphere pressure range 700 hPa~1060hPa Bandwidth For 10 Hz sine's ImV signal, the signal amplifier's input range should be 100%, 0.5Hz~100Hz should be between 70%~105%.

• High resolution thermal printing system ,high precision
• 12 leads collection in phase as well as 3 leads printing in phase
• Digital design and filter ,baseline auto-adjustable.
• LCD displays operation menu .DC/AC auto-exchange
• Automatic measurement ,analysis and diagnosis with high speed
• Elegant and compact outlook,with inner handhold.