We manufacture and export various oil testing
instruments and petroleum testing instruments that are of high quality. Our
range includes digital bomb calorimeter, redwood viscometer, etc.
Suitable for determination of close cup flash point
of petroleum and petroleum products having flash points below lOoC. Designed
as per IP-33, IP-170 and IS 1448 (Part i) 1985 (P: 20). Supplied with oil
cup, cover fitted with stirrer, thermometer socket, waterbath and stand,
electric heater is fitted at bottom workable at 220 Volts AC. supply.
Supplied with one thermometer. Temperature is controlled through a energy
regularfitted to the unit.
Optional Accessories
- Electrically driver stirrer with a FHP motor having flexible shaft.
- Spare oil cup thermometer (-35°C to 70°C)IP-74C
- Water bath thermometer (-30°C to 80°C) IP-75 C
Designed as per IP-34, ASTMD-93 and IS 1448 (Part i)
and IS 1209-1953 method B. It is use for determination of close cup flash
points offuel, oils, other viscous material and suspension of solids. Useful
for both low range as well as high range flash points of samples useing
different thermometers IP-15C or IP-16C respectively. The cover with spring
operated rotating Shutter having Oil Test Jet Flame Device, stirrer with
flexible shaft. The Assembly rests in" Air Bath which is covered with
Dome shape metal top. The cup is fitted with insulated Handle and locking
arrangement near Cup flange. The assembly energy regulator. Suitable to work
on 220 voltsAC supply.
Optional Accessories
- Electrically driver stirrer with a FHP motor having flexible shaft.
- Spare IR-15C thermometer LOW RANGE (-70°C to 110°C)
- Spare IP-16C thermometer HIGH RANGE (-90°C to 370°C)
Designed as per IP-36 and IS : 1448 (P : 69) for
determination of flash point and fire point of petroleum products except
fuel oil having open cup flash below 80°C. It consists of a open cup,
heating plate, thermometer clip and test flame attachment with swivel joint
for passing oven test liquid surface. Heating is controlled by means of
energy regulator. To work on 220 voltsAC supply.
Optional accessories
- Spare thermometer IP-28C(-5°C to 400°C)
Designed as per IP-70 for viscosily tests petroleum
products. Two adaptatons of Redwood Viscometers are available. Redwood NO.1
is suitable for liquids having redwood flow between 20 to 2000 seconds.
Redwood NO.2 are suitable for liquids heaving redwood flow exceeding 2000
seconds. The unit has a electrically heated bath with energy regulator for
temperature control. Supplied complete with a tap, oil cup, precision jet,
cup cover, ball value, thermometer clip, stirrer and M S. stand with
leveling screws. Supplied with one thermometer.
- Redwood NO.1
- Redwood No.2
Optional accessories
- Electrically driven stirrer with a FHP motor having flexible shaft
- Spare thermometer LOW RANGE IP-8C(0°C to 45°C)
- Spare thermometerMEDIUM RANGE IP-9C(40°Ct085°C)
- Spare thermometer HIGH RANGE IP-8C(76°C to 122°C)
- Stop Watch (1/10" of sec.)
As per IP 49,50 & 167 specifications and also
per IS 1448 (P: 92) & (P :93). This apparatus is used for penetration
test on a wide variety of materials such as greases, petroleum, bitumen,
tar, wax, polish, food stuff, rubber asphalts and pharmaceutical creams. A
given force is applied over a given period of times and the depression is
made in the Sample which is measured in tenths of a head Support mounted on
a vertical rod which can be adjusted for height. A rack and pinion and
pointer assembly provides fine adjustment of needle tip to Sample and in
Corporates a Slipping clutch mechanism which make reading of penetration and
subsequent resetting a sample and accurate operation. The dial graduate from
0-400 in one tenth millimeter Sub Division. The Instrument is supplied with
two sample containers.
- Penetrometer Apparatus with containers and weights having
peneteration Needle.
- Penetrometer Apparatus with containers and weights having
PENETERATION CONE hollow type.
- Penetrometer Apparatus with ELECTRONIC DIGITAL TIMER & electrical
arrangement with Brass Cone & Needle
