Laboratory Equipment

Double walled with inside made of Heavy S.S. and outside of M.S. sheet duly powder coated. The gap etween the two walls is fitted with high grade glass wool to minimize thermal loss. Temperature range from ambient to 250°C :t 2°C, is controlled by hydraulic capillary type thermostat. A variable speed strirring arrangement is fitted to the unit for maintaining temperature Plug to work on 220/230 voltsA.C. supply.

Optional Accessories

• Digital Temperatture Indicator-cum-Controller
• Microprocessor PID Digital Temperature Indicator-cum-Controller

A highly in demand instrument where water is required to be circulated to some external source through an F.H.P. pump. Most useful for circulating water to Abbe Refractometer, condenser coils etc. Temperature from ambient to 90°C is controlled through hydraulic type thermostat with an accuracy of:t 0.5°C. Inner chamber made of S.S. and outer chamber made of M.S. Sheet duly powder coated. Inside bath size 8" x 9" x 1 O%" with a cover at side of size :
Optional Accessories

• Digital Temperatture Indicator-cum-Controller
• Microprocessor PID Digital Temperature Indicator-cum-Controller

Outer body is made of thick mild steel sheet duly powder coated painted and inner chamber is made up of 304 grade Stainless Steel. Lid is also double walled properly insulated and is with locking facility. Whole unit is mounted on a sturdy angle iron frame The cooling coils are brazed to the outer side of S.S. chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any heat loss. For ataining the temp. below ambient, the refrigeration is done through CFC FREE hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with immersion type heating element .Fitted with stirrer for temperature uniformity throughout the chamber. Temperature range is from 5°C to 90°C is controlled Digital temp. indicator cum controller with an accuracy of :to.3°C. To work on 220/230 volts AC supply. The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.

Optional Accesories

• Microprocessor PID digital temperature indicator-cum-controller

Double walled, inside made of Aluminum steel duly black painted and outside made of Mild Steel Sheet duly power coated Thermostatic control from ambient temp. to 80DC :t 1 DC complete with indicators, cord & plug to work on 220/230V AC. without thermometer.

The appratus consists of an evaporating flask rotated by sparking induction motor in a heating water bath. Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a VARIABLE SPEED motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protudes about 120 m.m. into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask. The unit is fitted with a quick action jack. bath & Vacuum Pump

Optional Accessories

• Thermostatic Water Bath
• Digital Water Bath
• Vacuum Pump
• Micro attachment set
• Condenser double coil
• Roalaling Flask

The assembly consists of a glass flask with embedded heating elements fused in spiral with type glass coil internally at bottom. A double wall coiled condenser has standard ground glass joints. Complete with glass fitting, metallic stand, rings clamps and electrical fittings. The unit supplied is as per NPL patent design. To work on 220/230voltsA.C. supply.

Optional Accessories

• Automatic Low Water level cut off device in case water supply is stopped
• Special grade Rubber Tubing (10 mtrs oil

These units consist of main boiler. A built in heater enclosed in Quatrz glass tube. Housing auto Water level adjuster, Bottom outlet for cleaning waste discharge which is fitted with Teflon screw Cap valve. A coil condenser fitted on top for condensing vapours. The whole unit is mounted on epoxy coated metal box stand & covered with acrylic sheet cover for protection. Power supply unit is in built no extra attachment is required. Housing sturdy & reliable power System require 1 K.W. Power per heater.

These distillation units are more compact, require less space, reliable, easy to operate on Continue basis.