• Small (14" X 8" X 6")
• Large (18" X 14" X 10").
• For lumber Traction.

Our physiotherapy equipment paraffin wax bath, tank is made of heavy stainless steel used and is mounted on ball bearing rubber castors, for easy mobility. Works in electricity 220 - 230 volts and fitted with two special tanks is impression type heaters. Thermostatically controlled comes complete with three core wire pin plug .

A Solid-state lightweight, compact and portable unit with Microprocessor Control. The Ultrasonic waves differ from other electromagnetic radiation (Shortwave, Microwave etc.) with the energy being propagated as mechanical vibrations and gives a massaging effect to the deep tender part of muscles. Ultrasonic Muscle Stimulator is very effective in treatment of Neuromuscular and Muscular-skeletal diseases including Arthritis, Sinusitis etc. The sound head minimizes heat and thus eliminates any discomfort to the patient.

Our physiotherapy equipment ultrasonic unit is Microprocessor Controlled, Digital Display for Output continuous & Pulse Modes Four Selectable Settings in Pulse Mode Digital Timer Audio Alarm for Timer .

• Weight Height: 5.5
• Width: 10.5
• Depth: 7.5
• Voltage AC 220V Probe Transmitter Freq. 1 MHz.
• Protection Class - I Complies with IEC 601-1

• The electrostatic intermittent traction machine is an accurate and sturdy unit. Improved reliability has been achieved using solid state Electronics. The Silent motor is smooth, reliable and lasting. The electronic traction is of solid construction and is easy to use the traction force can be easily adjusted from 5 to 45 kgs. The traction froce can be increased 90 kgs. using traction force doubler. The treatment time is electronically adjusted and displayed by LEDS digitally. At the end of treatment time the alarm comes up and traction stops.
• Traction Mode Selector : Operates in static (Constant Traction) or in intermittent traction mode.
• Hold Time/Rest Time : When the traction is in intermittent mode HOLD & REST time can be selected with rotary switch
• Traction Force Selector : The traction force of 5 to 45 kgs, is selected with a rotary switch, with double upto 90 kgs
• Treatment Time Selector : Displayed LEDS, switches off the unit after treatment time
• Mounting : Wall or table mounting

• Voltage : 220V, 50 Cycle
• Force : Doubler upto 90 kgs.
• Treatment : 1, 5, 10 sec.
• Mounting : Table or wall mount.
• Traction : 5 to 45 kgs with
• Hold Time : 20, 40, 60 sec.
• Time : Display

• Ultrasonic applicator : 1 Pc.
• Applicator Stand : 1 Pc.
• Space fuse : 5 Pcs.
• Machine cover : 1 Pc.
• Jelly bottle : 1 Pc.

This device is an innovative break through over other traction in the market for the treatment of cervical and lumbar region of the spine with salient features:

• Operates in static or intermittent mode.
• Digital display for hold time and rest time.
• Feather touch selection for treatment time with digital display.
• Feather touch selection for torque of 5 to 45 Kg. with digital display.
• Patient safety switch with audio visual alarm.
• Alarm at the end of treatment comes up and traction force released.

• Cervical Collar
• Cervical spreader bar
• Pelvic belt
• Thoracic belt
• Traction doubler
• Main cord

• Power Consumption :   100 Watt(approx.)
• Input Voltage :   220 Volts A.C. 50 Hz.
• Hold Time :   20, 40, 60, 80(second)
• Release Time :   1,5,10,20(second)

CPM is a method to treat joints of the lower limb for post operation recovery and gives excellent results. The device is programmed for septic arthritis, ligaments tendon healing and also for treatment of intra articular fractures.

• Electronic controls enables for range of motion.
• Adjustable flexion angle from 0o to 110o.
• 0 to 30 minutes countdown timer.
• Patient safety switch to stop and reverse the motion.
• Manual up/down:Manual flexion and release

• Mains Input : 20V AC 50Hz
• Power : 20 watt
• Time : 0 to 30 minutes
• Flexion Angle : Adjustable from 0o to 110o
• Delay timer : 0 to 10 second
• Weight : 9 Kg

• Backache
• Bruises & Sprains
• Rheumatic Pains etc.
• Wounds, Inflamed skin, Boils, Insect Bites
• Teeth extraction, Chiblains, Numb-fingers
• Infrared for pet animals
• Loss of Hair, Massage, Beauty Treatment

This units is latest development with fully SOLID STATE Electronic circuitry and is very light weight compact and portable. The Sound Head with a special transduces is designed to keep a very good skin contact for deep Ultrasound Therapy. The Ultrasonic waves differ from other electromagnetic radiation such as Shortwave, Microwave etc. as the energy is propagated as mechanical vibrations and gives a messaging effect to the deep tender part of the muscle. This is very neuromuscular and muscular-skeletal diseases including Arthritis, Sinusitis etc. The sound head generator minimizes heat and thus eliminates any discomfort of the patient. The unit is fitted with a Timer Switch to put the completion of predetermined dosage time. It operates on 220/240 Volts A.C. The treatment head gives continuous or pulsed Ultrasound Wave obtained through a selective switch. In Analogue model upto 15 Watts in continuous and 21 Watts in pulsed modes. Supplied complete with Ultrasound Applicator (Sound Head), Main Line Cord, 5 Spare Fuses and Foam Rexene Cover.

• Power Output : 2.5W/CM2 in continuous mode, 3.5W/CM2 in pulse mode
• Output mode : Continuous mode & pulse mode
• Timer : 0 to 30 mins
• Main Supply : 220 Volts 50 cycles
• Output : Meter display

A newly improved traction table suitable for Lumber or Cervical Traction. This table can also be used for other treatmentinstruments. The table is bery sturdy with a 24" wide top. The table is fitted with 'non friction' rolling lumber section top for smooth efficient traction. A mounting board is provided for convenient placement of traction machine. The table top elegant by thick upholstered id 72" (183cm) long. The overall length of the table is 92" approx. The mounting board is fitted with levelling device and provided with non skidpad.